Closed

Non-Torque Loading System for Electrical Machine Testing Including Drive System

University Of Edinburgh

Value
Not stated
Published
27 Aug 2026
Deadline
28 Sept 2026
Procedure
Open procedure
Category
31161000 — Parts for electrical motors and generators
Location
UKM75
Notice reference
081681-2026

Requirements summary

The University of Edinburgh is procuring a Non-Torque Loading System for electrical machine testing, including a drive system, with supply, installation and technical support. The system must apply non-torque loads of around 50 kN on at least two axes (preferably three), with a minimum 20 kW power rating and a 20-100 rpm speed range. It is intended for testing full-scale and downscaled electrical machines for offshore renewable energy applications, with delivery to King's Buildings, Edinburgh.

Key requirements

  • Non-torque loading system with minimum 20 kW power rating (preferably up to 50 kW or above)
  • Applies around 50 kN non-torque force in at least X and Y axes (preferably 3 axes), with 25 kNm moment
  • Minimum speed range 20-100 rpm (preferably up to 10-1000 rpm) and minimum 2000 Nm torque at 100 rpm
  • Four-quadrant drive for the machine under test, bypassable for custom drives; test in motoring and generating modes
  • Enclosure of 5x2m with max height 2m; accommodates machines from 0.5 m to 1.0 m diameter; floor mounting on 175 mm concrete/XPS/screed slab
  • Supply, installation and technical support, with a 720-day contract period and optional long-term servicing

Similar open notices

No similar open notices are indexed right now.

Non-Torque Loading System for Electrical Machine Testin… | ProposAI